LENSER Mixed Pack
Get a significant cost reduction by combining chamber and membrane filter elements compared to a membrane-only plate package.
Still benefit from all the advantages of membrane technology.
LENSER Mixed Packs are a combination of:
- KM any membrane filter element, whether welded or interchangeable.
- KX chamber filter element as associated combination plate for the respective membrane
Advantages
- Shorter filtration cycles
- Shorter washing times
- Higher dry solids content
- Higher throughput rate
- Reduced water consumption
- Reduced air consumption during blow-drying
- Cost reduction by combining chamber and membrane filter elements
| Format: | From 320 mm to 2,440 mm |
| Cake thickness: | Please take the cake thickness from the data sheets in the download area |
| Filtration pressure: | Please take the filtration pressure from the data sheets in the download area |
| Squeezing pressure: | Please take the squeezing pressure from the data sheets in the download area |
| Inlet position: | centre, off-centre, corner, external |
| Version: | C |
Do you need filter elements for use in an explosion-proof application according to ATEX RL/94/9/EG?
LENSER is a certified manufacturer of electrostatically dissipative filter elements of device category 2G for use in explosion protection zone 1.
We confirm the conformity of the filter elements with the ATEX directive by issuing a corresponding certificate.
Data sheets / Operating instructions
All LENSER data sheets and operating manuals are stored in our download area. To view them, please register first.
To the login or registration.