KM UM HD bloc
High-pressure membrane filter elements are characterized by their high load capacity.
Thanks to special inlet designs and material combinations, these filter elements can withstand squeezing pressures of up to 30 bar.
Advantages
- Shorter filtration cycles
- Shorter washing times
- Higher dry solids content
- Higher throughput rate
- Reduced water consumption
- Reduced air consumption during blow-drying
- Squeezing pressure up to 30 bar
| Format: | From 470 mm to 1,500x2000 mm |
| Cake thickness: | From 15 mm to 50 mm |
| Filtration pressure: | Up to 8 bar |
| Squeezing pressure: | Up to 30 bar |
| Inlet position: | centre, off-centre, corner, external |
| Version: | C |
Do you need filter elements for use in an explosion-proof application according to ATEX RL/94/9/EG?
LENSER is a certified manufacturer of electrostatically dissipative filter elements of device category 2G for use in explosion protection zone 1.
We confirm the conformity of the filter elements with the ATEX directive by issuing a corresponding certificate.
Data sheets / Operating instructions
All LENSER data sheets and operating manuals are stored in our download area. To view them, please register first.
To the login or registration.