KM RUD
With type KM RUD, the membrane are fastened in the designated mounting grooves of the basic body by means of clamping strips. Please note that the KM RUD type can only be used as LENSER Mixed Pack.
Please note: The KM RUD version is only available as LENSER Mixed Pack!
Advantages
- Shorter filtration cycles
- Shorter washing times
- Higher dry solids content
- Higher throughput rate
- Reduced water consumption
- Reduced air consumption during blow-drying
- Exchangeable membrane for cost and time efficient maintenance
- Easy exchange of the membrane half
- Only as LENSER Mixed Pack
| Format: | 320 mm and from 1,000 mm to 1,500 mm |
| Cake thickness: | From 15 mm to 50 mm |
| Filtration pressure: | Up to 8 bar |
| Squeezing pressure: | Up to 16 bar |
| Inlet position: | Please take the inlet positions from the data sheets in the download area |
| Version: | C |
Do you need filter elements for use in an explosion-proof application according to ATEX RL/94/9/EG?
LENSER is a certified manufacturer of electrostatically dissipative filter elements of device category 2G for use in explosion protection zone 1.
We confirm the conformity of the filter elements with the ATEX directive by issuing a corresponding certificate.
Data sheets / Operating instructions
All LENSER data sheets and operating manuals are stored in our download area. To view them, please register first.
To the login or registration.