KM RUM
Exchangeable membrane filter element for cost-efficient maintenance
With the KM RUM type, the membrane halves are fixed to the carrier plate by means of clip strips. These designs allow easy and problem-free replacement of the membrane.
Advantages
- Shorter filtration cycles
- Shorter washing times
- Higher dry solids content
- Higher throughput rate
- Reduced water consumption
- Reduced air consumption during blow-drying
- Exchangeable membrane for cost and time efficient maintenance
- Easy exchange of the membrane half
| Format: | From 800 mm to 2,440 mm |
| Cake thickness: | From 15 mm to 50 mm |
| Filtration pressure: | Up to 8 bar |
| Squeezing pressure: | Up to 16 bar |
| Inlet position: | centre, off-centre, corner, external |
| Version: | C |
Do you need filter elements for use in an explosion-proof application according to ATEX RL/94/9/EG?
LENSER is a certified manufacturer of electrostatically dissipative filter elements of device category 2G for use in explosion protection zone 1.
We confirm the conformity of the filter elements with the ATEX directive by issuing a corresponding certificate.
Data sheets / Operating instructions
All LENSER data sheets and operating manuals are stored in our download area. To view them, please register first.
To the login or registration.